Skip to main content

소개

The process of replacing the trackpad of your BlackBerry Bold 9900 will allow you to become familiar with your device and restore full functionality of the trackpad.

  1. Place phone screen down.
    • Place phone screen down.

    • Use your finger to life upward on the battery case.

    • Pull the cover away from the battery.

  2. Lift the edge of battery with the green stripe upward to remove battery.
    • Lift the edge of battery with the green stripe upward to remove battery.

  3. The SIM Card is located where the red rectangle is shown. To remove SIM Card, push the card inward towards the top of the phone then release. The SIM card will be ejected.
    • The SIM Card is located where the red rectangle is shown.

    • To remove SIM Card, push the card inward towards the top of the phone then release. The SIM card will be ejected.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Lift the bezel at the bottom of the phone up and peel it away from the phone. Lift the bezel at the bottom of the phone up and peel it away from the phone.
    • Lift the bezel at the bottom of the phone up and peel it away from the phone.

  6. Remove the two exposed screws using the T5 Torx screwdriver. Remove the two exposed screws using the T5 Torx screwdriver.
    • Remove the two exposed screws using the T5 Torx screwdriver.

  7. Now lever the keyboard up using the screwdriver in the indicated hole.
    • Now lever the keyboard up using the screwdriver in the indicated hole.

  8. The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard. The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.
    • The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

  9. Push into the trackpad. This will release the trackpad supporting piece. Push into the trackpad. This will release the trackpad supporting piece. Push into the trackpad. This will release the trackpad supporting piece.
    • Push into the trackpad. This will release the trackpad supporting piece.

  10. The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad. The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.
    • The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.

결론

To reassemble your device, follow these instructions in reverse order.

Chris Velasquez

회원 가입일: 2018년 01월 30일

193 평판

안내서 2개 작성하였습니다

Baylor, Team S1-G4, Johnson Spring 2018 Baylor, Team S1-G4, Johnson Spring 2018 회원

BU-JOHNSON-S18S1G4

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 3

지난 30일: 14

전체 시간: 331