1. Press down on the battery release button and slide the back cover up with your thumb.
    • Press down on the battery release button and slide the back cover up with your thumb.

    댓글 쓰기

  2. Pry from the top of the battery to pull it out.
    • Pry from the top of the battery to pull it out.

    댓글 쓰기

    • Slide the metal sim card cover to the unlock position.

    • Remove the sim card.

    • The arrows on the sim card enclosure indicate the lock and unlock positions.

    댓글 쓰기

    • Remove the two T5 Torx screws circled at the top of the phone.

    • The T5 Torx screws may be covered by a white sticker.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Remove the red cover at the bottom of the phone.

    • You may have to work a spudger underneath to release the plastic clips.

    댓글 쓰기

    • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

    • Use a spudger to pry the front cover away from the side panels.

    • Work the spudger around the entire phone until the front cover is free.

    댓글 쓰기

    • Remove the keyboard.

    댓글 쓰기

    • Remove the four T6 Torx screws located on the corners of the keyboard frame.

    댓글 쓰기

    • Now remove the left and right side panels.

    댓글 쓰기

    • Remove the keyboard frame.

    • Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.

    • Now remove the screen housing.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Sean Willis

회원 가입일: 2012년 01월 26일

229 평판

안내서 5개 작성하였습니다

Cal Poly, Team 10-32, Amido Winter 2012 Cal Poly, Team 10-32, Amido Winter 2012 회원

CPSU-AMIDO-W12S10G32

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 1

전체 시간: 1,510