기기를 수리하세요 커뮤니티 상점

Blackberry Curve 8310 Screen Housing Replacement

필요한 것

  1. Blackberry Curve 8310 Screen Housing Replacement, Battery: 1 단계, 이미지 1/1

    • Press down on the battery release button and slide the back cover up with your thumb.

    편집

  2. Blackberry Curve 8310 Screen Housing Replacement: 2 단계, 이미지 1/1

    • Pry from the top of the battery to pull it out.

    편집

  3. Blackberry Curve 8310 Screen Housing Replacement, Lens: 3 단계, 이미지 1/1

    • Slide the metal sim card cover to the unlock position.

    • Remove the sim card.

    • The arrows on the sim card enclosure indicate the lock and unlock positions.

    편집

  4. Blackberry Curve 8310 Screen Housing Replacement: 4 단계, 이미지 1/1

    • Remove the two T5 Torx screws circled at the top of the phone.

    • The T5 Torx screws may be covered by a white sticker.

    편집

  6. Blackberry Curve 8310 Screen Housing Replacement: 5 단계, 이미지 1/1

    • Remove the red cover at the bottom of the phone.

    • You may have to work a spudger underneath to release the plastic clips.

    편집

  7. Blackberry Curve 8310 Screen Housing Replacement: 6 단계, 이미지 1/3 Blackberry Curve 8310 Screen Housing Replacement: 6 단계, 이미지 2/3 Blackberry Curve 8310 Screen Housing Replacement: 6 단계, 이미지 3/3

    • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

    • Use a spudger to pry the front cover away from the side panels.

    • Work the spudger around the entire phone until the front cover is free.

    편집

  8. Blackberry Curve 8310 Screen Housing Replacement, Keyboard: 7 단계, 이미지 1/1

    • Remove the keyboard.

    편집

  9. Blackberry Curve 8310 Screen Housing Replacement, Screen Housing: 8 단계, 이미지 1/1

    • Remove the four T6 Torx screws located on the corners of the keyboard frame.

    편집

  10. Blackberry Curve 8310 Screen Housing Replacement: 9 단계, 이미지 1/2 Blackberry Curve 8310 Screen Housing Replacement: 9 단계, 이미지 2/2

    • Now remove the left and right side panels.

    편집

  11. Blackberry Curve 8310 Screen Housing Replacement: 10 단계, 이미지 1/3 Blackberry Curve 8310 Screen Housing Replacement: 10 단계, 이미지 2/3 Blackberry Curve 8310 Screen Housing Replacement: 10 단계, 이미지 3/3

    • Remove the keyboard frame.

    • Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.

    • Now remove the screen housing.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Sean Willis

회원 가입일: 01/26/12

229 평판

안내서 5개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team 10-32, Amido Winter 2012 Cal Poly, Team 10-32, Amido Winter 2012 회원

CPSU-AMIDO-W12S10G32

4 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 2

전체 시간: 1,650