주요 콘텐츠로 건너뛰기

Blackberry Curve 8330 Motherboard Replacement

필요한 것

  1. Blackberry Curve 8330 Motherboard Replacement, Remove Back Cover: 1 단계, 이미지 1/1
    • We did not have an actual back cover or battery for the phone we were given. Therefore, the first couple of steps will be without pictures.

    • Hold the phone with the back side facing you.

    • Press down on the silver tab towards the bottom end of the phone.

    • Carefully lift up the back casing to reveal the battery.

  2. Blackberry Curve 8330 Motherboard Replacement, Remove Battery: 2 단계, 이미지 1/1
    • Put your finger on the top left corner of the battery and lift the battery up and out of its housing.

    • The phone should now look like this.

  3. Blackberry Curve 8330 Motherboard Replacement, Keyboard: 3 단계, 이미지 1/1
    • Remove the two top screws using a T5 Torx screwdriver.

  4. Blackberry Curve 8330 Motherboard Replacement: 4 단계, 이미지 1/2 Blackberry Curve 8330 Motherboard Replacement: 4 단계, 이미지 2/2
    • Use a plastic opening tool to pry the edges of the bottom cover until it snaps loose.

    • The cover will now pull off easily.

  5. Blackberry Curve 8330 Motherboard Replacement: 5 단계, 이미지 1/2 Blackberry Curve 8330 Motherboard Replacement: 5 단계, 이미지 2/2
    • Use a plastic opening tool to pry between the front and back cover.

    • Start prying from wherever it is easiest to separate the silver and black plastic of the covers.

    • There are 5 securing clips on the front panel to disconnect.

    • Pry gently to prevent breaking the plastic clips when removing the front panel.

    • Once all the clips have been freed, the front cover will lift away from the phone.

  6. Blackberry Curve 8330 Motherboard Replacement: 6 단계, 이미지 1/1
    • Lift the flexible keypad away from the device. It should come off easily.

  7. Blackberry Curve 8330 Motherboard Replacement: 7 단계, 이미지 1/2 Blackberry Curve 8330 Motherboard Replacement: 7 단계, 이미지 2/2
    • Use a T6 Torx Screwdriver to remove the four corner screws on the keyboard's housing.

    • Lift the keyboard frame away from the device.

    • There may be a small amount of adhesive at the bottom of the frame that needs to be pulled away.

  8. Blackberry Curve 8330 Motherboard Replacement, LCD Panel: 8 단계, 이미지 1/2 Blackberry Curve 8330 Motherboard Replacement, LCD Panel: 8 단계, 이미지 2/2
    • Detach each side casing by pulling them off gently from the phone.

  9. Blackberry Curve 8330 Motherboard Replacement: 9 단계, 이미지 1/1
    • Remove the back housing from the mother board.

  10. Blackberry Curve 8330 Motherboard Replacement: 10 단계, 이미지 1/1
    • Unhook the screen frame from the small tab at the top of the motherboard.

  11. Blackberry Curve 8330 Motherboard Replacement: 11 단계, 이미지 1/2 Blackberry Curve 8330 Motherboard Replacement: 11 단계, 이미지 2/2
    • Using a plastic opening tool, detach the connector on the LCD screen from the motherboard.

    • There may be some adhesive behind the LCD screen. If needed, pry the LCD screen away from the motherboard using the plastic opening tool.

    • Remove the LCD screen from the motherboard

  12. Blackberry Curve 8330 Motherboard Replacement, Motherboard: 12 단계, 이미지 1/1
    • Once the LCD screen is taken off, the motherboard is fully separated from the device.

    • The picture shown is the back side of the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

Joshua Ramos

회원 가입일: 04/04/12

65 평판

안내서 2개 작성하였습니다

Cal Poly, Team 14-11, Forte Spring 2012 Cal Poly, Team 14-11, Forte Spring 2012 회원

CPSU-FORTE-S12S14G11

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 2,375