Blackberry Curve 9300 Speaker Replacement

소개

This Speaker Replacement guide was written to help consumers fix their device as easy as possible. The steps show the steps required to replace the speaker.

필요한 것

1 단계 Battery

Blackberry Curve 9300 Speaker Replacement, Battery: 1 단계, 이미지 1/1

Place your Blackberry face down in front of you.

번역하기

2 단계

Locate the indent on the bottom of the back cover.
Use your fingernail to lift and remove the back cover.

번역하기

3 단계

From the top, use your fingernail to lift and remove the battery.

번역하기

4 단계 Keyboard

Blackberry Curve 9300 Speaker Replacement, Keyboard: 4 단계, 이미지 1/1

Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.

번역하기

5 단계

Place the phone face up and use tweezers to securely grip and lift the screen upwards.

번역하기

6 단계

Use a plastic opening tool to lift the bottom edge of the front cover.

번역하기

7 단계

Use your nails to unclip the sides of the frame from the phone.

번역하기

8 단계

Lift and remove the frame.

번역하기

9 단계

Lift and remove the keyboard.

번역하기

10 단계 Speaker

Blackberry Curve 9300 Speaker Replacement, Speaker: 10 단계, 이미지 1/1

Locate and remove the two 5mm screws on top of the keyboard base with a T6 Torx screwdriver.

번역하기

11 단계

Carefully pull keyboard base up and away from phone.
Disconnect keyboard base from phone completely.

번역하기

12 단계

Blackberry Curve 9300 Speaker Replacement: 12 단계, 이미지 3/3

Remove the four 5mm screws on the top and bottom of phone with a T6 Torx screwdriver

번역하기

13 단계

Using a prying tool, find the crease below the screen.
Insert where shown and use the tool to unclip the two sides of screen from body.
Prying tool goes approximately midway between the top and bottom edge of the screen.