소개

Follow this guide to install a SIM card in the Blackberry Pearl 8100.

도구

도구는 필요하지 않습니다.

부품

부품은 필요하지 않습니다.

Before working on the phone, be sure that the phone is turned off. Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.
  • Before working on the phone, be sure that the phone is turned off.

  • Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.

댓글 쓰기

  • Remove the battery located directly below back panel.

댓글 쓰기

Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).
  • Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).

댓글 쓰기

Lift the metal casing.
  • Lift the metal casing.

댓글 쓰기

  • Insert an SD Card.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Robert Cronin

회원 가입일: 2010년 04월 08일

520 평판

안내서 6개 작성하였습니다

Cal Poly, Team 34-57, Forte Spring 2010 Cal Poly, Team 34-57, Forte Spring 2010 회원

CPSU-FORTE-S10S34G57

5 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 12

전체 시간: 8,524