Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement

소개

A diffuser's fan and battery are common faults in a diffuser breaking down. The fan keeps the internals of the device, like the motherboard, from overheating. In this guide, we replace a fan from a Blossom Ultrasonic Essential Oil Diffuser ARM-510GY.

Before disassembling the diffuser, make sure there is no oil or water left in the diffuser and make sure the diffuser is unplugged.

필요한 것

1 단계 Fan

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement, Fan: 1 단계, 이미지 1/3

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement, Fan: 1 단계, 이미지 2/3

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement, Fan: 1 단계, 이미지 3/3

Make sure the diffuser is not plugged into a socket and that there is no water or oil near or in the diffuser before beginning the guide.
Use a Phillips #2 screwdriver to remove the four 8 mm screws on the bottom of the diffuser.

편집

2 단계

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement: 2 단계, 이미지 3/3

Lift the ceramic top of the oil diffuser.
Then lift off the plastic top off the diffuser.

편집

3 단계

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement: 3 단계, 이미지 3/3

Lift the last plastic lid.
You will see a circuit board, and there will be a cord connecting it to the circuit board.

편집

4 단계

Gently unplug the cord from the circuit board.
Place the plastic lid somewhere safe on the a flat surface.

편집

5 단계

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement: 5 단계, 이미지 3/3

Remove the plastic ring and place somewhere safe on a flat surface.

편집

6 단계

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement: 6 단계, 이미지 3/3

Remove two Truss head 4 mm screws with a Phillips #2 screwdriver and place safely nearby.

편집

7 단계

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement: 7 단계, 이미지 3/3

Gently lift the circuit board onto it's side
The white connector plugs the fan into the circuit board.

편집

8 단계

Unplug the white connector.
There are four #M1 6 mm Phillips pan head screws holding down the fan.

편집

9 단계

Blossom Ultrasonic Essential Oil Diffuser ARM-510GY Fan Replacement: 9 단계, 이미지 3/3

Remove the #M1 6 mm screws with a Phillips #2 screwdriver while holding down the fan.
Gently lift the fan and place the fan someplace safe on the flat surface.

편집