주요 콘텐츠로 건너뛰기

이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.

필요한 것

  1. 이 단계는 번역되지 않았습니다. 번역을 도와주십시오

    : 1 단계, 이미지 1/1
    • Using a quarter, turn the battery cover 1/8th of a turn counterclockwise.

  2. 이 단계는 번역되지 않았습니다. 번역을 도와주십시오

    : 2 단계, 이미지 1/2 : 2 단계, 이미지 2/2
    • Remove cover and battery. The new battery should be placed with the positive (flat) side facing up.

    • The correct battery for your remote is a CR2032. You may also use a DL2032.

결승점

Brodie Sutherland

회원 가입일: 04/14/15

303 평판

안내서 1개 작성함

Cal Poly, Team 4-1, Maness Spring 2015 Cal Poly, Team 4-1, Maness Spring 2015 회원

CPSU-MANESS-S15S4G1

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

We have a Bose Wave radio w/remote. This remote is not the one shown here with a screw for the battery compartment. It's the type w/a sliding holder for the battery on the south end (bottom of the battery). Someone went to replace the battery and shoved the holder in upside down I believe. Consequently the holder will not come out all the way.

There must be a way to get it out without forcing it. There's a pinch clip you have to either squeeze or move to the left to disengage it from the locked position and free it up. Any ideas as to how to accomplish this? We appreciate a reply back so this would make our Christmas better.

Merry Christmas & Happy Holidays! Cheers!

asbirdiesingh - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 31

30일 전: 129

전체 시간: 13,239