주요 콘텐츠로 건너뛰기

Bose Wave Radio AWR1-1W Speaker Replacement

필요한 것

  1. Bose Wave Radio AWR1-1W Speaker Replacement, Base: 1 단계, 이미지 1/2 Bose Wave Radio AWR1-1W Speaker Replacement, Base: 1 단계, 이미지 2/2
    • Remove the four 19mm Phillips #2 screws from the base of the device.

  2. Bose Wave Radio AWR1-1W Speaker Replacement: 2 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 2 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 2 단계, 이미지 3/3
    • Turn the device over, holding the base on with your thumbs.

    • Hold the device tightly to prevent the base from falling off.

  3. Bose Wave Radio AWR1-1W Speaker Replacement: 3 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 3 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 3 단계, 이미지 3/3
    • Gently lift the top off of the device.

    • Lift in the direction shown to avoid damaging the wires connecting the top and base of the device.

  4. Bose Wave Radio AWR1-1W Speaker Replacement: 4 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 4 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 4 단계, 이미지 3/3
    • Pinch and unplug the white connector from the device.

  5. Bose Wave Radio AWR1-1W Speaker Replacement: 5 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 5 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 5 단계, 이미지 3/3
    • Gently pinch and pull on the white ribbon cable to disconnect it from the base.

  6. Bose Wave Radio AWR1-1W Speaker Replacement: 6 단계, 이미지 1/1
    • The base should now be completely detached from the device.

  7. Bose Wave Radio AWR1-1W Speaker Replacement, Front Grill: 7 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement, Front Grill: 7 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement, Front Grill: 7 단계, 이미지 3/3
    • Wedge the spudger between the top and front panel on the right side of the device.

    • Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side.

    • Repeat for the left side of the device.

    • Too much pressure may break the panel, but it should flex slightly before it pops out.

  8. Bose Wave Radio AWR1-1W Speaker Replacement: 8 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 8 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 8 단계, 이미지 3/3
    • Once the panel is released on the left side, wedge the spudger between the top panel and front grill of the device as shown.

    • Apply pressure and move the spudger upward until the front grill pops out.

    • Repeat for the right side of the device.

  9. Bose Wave Radio AWR1-1W Speaker Replacement: 9 단계, 이미지 1/1
    • Lift the front grill away from the device.

  10. Bose Wave Radio AWR1-1W Speaker Replacement, Speakers: 10 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement, Speakers: 10 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement, Speakers: 10 단계, 이미지 3/3
    • Remove a total of eight 15mm Phillips #2 screws surrounding each speaker.

  11. Bose Wave Radio AWR1-1W Speaker Replacement: 11 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 11 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 11 단계, 이미지 3/3
    • Gently pull each speaker out of the device.

  12. Bose Wave Radio AWR1-1W Speaker Replacement: 12 단계, 이미지 1/3 Bose Wave Radio AWR1-1W Speaker Replacement: 12 단계, 이미지 2/3 Bose Wave Radio AWR1-1W Speaker Replacement: 12 단계, 이미지 3/3
    • Pull the wire connected to the speakers out of the device.

    • You already disconnected this wire from the inside of the device earlier.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Cassie Harriman

회원 가입일: 04/18/17

1,033 평판

안내서 5개 작성하였습니다

Cal Poly, Team S15-G2, Banghart Spring 2017 Cal Poly, Team S15-G2, Banghart Spring 2017 회원

CPSU-BANGHART-S17S15G2

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 15

30일 전: 77

전체 시간: 6,892