기기를 수리하세요 커뮤니티 상점

Bowers and Wilkins T7 Speaker Driver Replacement

소개

Use this guide to learn how to replace your left and right speaker drivers for the Bowers and Wilkins T7 Bluetooth Speaker.

필요한 것

  1. Bowers and Wilkins T7 Speaker Driver Replacement, Access Panel: 1 단계, 이미지 1/1

    • As with all electronic devices, make sure your device is powered off before you begin.

    • Gently lift up the access panel; it should easily "pop" open.

    편집

  2. Bowers and Wilkins T7 Speaker Driver Replacement: 2 단계, 이미지 1/1

    • Remove 14mm screws on the front panel with a J1 Phillips head screwdriver.

    • There are 8 screws in total.

    편집

  3. Bowers and Wilkins T7 Speaker Driver Replacement: 3 단계, 이미지 1/2 Bowers and Wilkins T7 Speaker Driver Replacement: 3 단계, 이미지 2/2

    • Be gentle, the rubber seal is fragile and easy to tear, resulting in cosmetic damage to your device.

    • Using the ifixit Opening Tool, carefully pry off the rubber seal around the sides.

    • The seal is held by adhesive, if this is proving difficult you can use a heat gun to help the process.

    편집

  5. Bowers and Wilkins T7 Speaker Driver Replacement: 4 단계, 이미지 1/2 Bowers and Wilkins T7 Speaker Driver Replacement: 4 단계, 이미지 2/2

    • The cover is the most difficult part to remove. As you work, pry continuously, moving the tool around the device, working it a little further as you go.

    • Using the ifixit Opening Tool, pry open at the seam found under the rubber seal.

    • As the cover starts to come off, you can lift up using your hand.

    편집

  6. Bowers and Wilkins T7 Speaker Driver Replacement: 5 단계, 이미지 1/3 Bowers and Wilkins T7 Speaker Driver Replacement: 5 단계, 이미지 2/3 Bowers and Wilkins T7 Speaker Driver Replacement: 5 단계, 이미지 3/3
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Gently squeeze the internal locking mechanism inside the red and white terminals with either your fingers or a pair of precision tweezers.

    • While squeezing the internal locking mechanism, pull back the terminal.

    • Repeat this process for the second speaker.

    편집

  7. Bowers and Wilkins T7 Speaker Driver Replacement, Speaker Driver: 6 단계, 이미지 1/2 Bowers and Wilkins T7 Speaker Driver Replacement, Speaker Driver: 6 단계, 이미지 2/2

    • Remove the 7mm screws around the speaker using a J100 Phillips head screwdriver.

    • There are 4 screws in total around each speaker.

    편집

  8. Bowers and Wilkins T7 Speaker Driver Replacement: 7 단계, 이미지 1/1

    • Now that all the screws are removed, pull straight up on the speaker drive to remove the speaker drive component.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Oluwagbemisola Aderibigbe

회원 가입일: 02/27/17

230 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

USF Tampa, Team S7-G1, Cagle Spring 2017 USF Tampa, Team S7-G1, Cagle Spring 2017 회원

USFT-CAGLE-S17S7G1

5 회원들

안내서 4개 작성하였습니다

댓글 2개

Where do you buy the replacement driver?

nigellittledesignandmedia - 답글

Tôi có cùng một câu hỏi? Tôi sẽ phải mua chúng ở đâu.

Phương Trần - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 5

30일 전: 21

전체 시간: 2,132