Braven BRV-1M Sub-woofer Cone Replacement - iFixit 수리 안내서

필요한 것

1 단계 Sub-woofer Cone

Braven BRV-1M Sub-woofer Cone Replacement, Sub-woofer Cone: 1 단계, 이미지 1/1

To remove the outer rubber casing use a 3mm Hex bit to remove the 4 large 12mm Hex screws on both sides, found on the bottom part of the device.

2 단계

Braven BRV-1M Sub-woofer Cone Replacement: 2 단계, 이미지 1/1

Using the Metal Spudger, carefully pry each side of the rubber casing away from the device.
A little resistance should be felt, but not enough to bend the spudger.

3 단계

Braven BRV-1M Sub-woofer Cone Replacement: 3 단계, 이미지 1/1

To remove the hard inner plastic casing, use a Phillips #00 head bit to remove the 16 small 9mm screws surrounding the subwoofer on the top side of the device.

4 단계

Braven BRV-1M Sub-woofer Cone Replacement: 4 단계, 이미지 1/1

Carefully lift away the broken sub-woofer plate of the device. Replace with functioning sub-woofer plate.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Erik Oliva

회원 가입일: 02/14/18

607 평판

안내서 6개 작성하였습니다

+1개 배지 추가

팀

USF Tampa, Team S2-G1, Eyestone Spring 2018 USF Tampa, Team S2-G1, Eyestone Spring 2018 회원

USFT-EYESTONE-S18S2G1

4 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 6

전체 시간: 190