주요 콘텐츠로 건너뛰기

Brentwood TS-292B Browning Dial Circuitboard Replacement

필요한 것

  1. Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: 1 단계, 이미지 1/3 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: 1 단계, 이미지 2/3 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: 1 단계, 이미지 3/3
    • Remove the five screws indicated using a Philips head screwdriver.

  2. Brentwood TS-292B Browning Dial Circuitboard Replacement: 2 단계, 이미지 1/2 Brentwood TS-292B Browning Dial Circuitboard Replacement: 2 단계, 이미지 2/2
    • Pull hard on the browning lever until it detaches from the toaster.

    • It will take some force to pull it off.

    • Once the tab is off, lift up on the housing to remove it from the toaster.

  3. Brentwood TS-292B Browning Dial Circuitboard Replacement: 3 단계, 이미지 1/1
    • Once the housing has been pulled upwards, carefully uplug the wire connecting the browning dial circuit board to the main circuit board.

  4. Brentwood TS-292B Browning Dial Circuitboard Replacement: 4 단계, 이미지 1/2 Brentwood TS-292B Browning Dial Circuitboard Replacement: 4 단계, 이미지 2/2
    • There are four screws on the circuit board for the browning dial.

    • Unscrew each of them with a Philips head screwdriver to detach the board and remove the board and dial from the toaster housing.

  5. Brentwood TS-292B Browning Dial Circuitboard Replacement: 5 단계, 이미지 1/2 Brentwood TS-292B Browning Dial Circuitboard Replacement: 5 단계, 이미지 2/2
    • There are two holes on the board where the pin from the browning dial can align.

    • Refer to the images if you are having trouble finding them.

    • Replace the browning dial by inserting the pin on the dial into one of the holes indicated.

    • Replace the entire circuit board if need be.

결론

To reassemble your device, follow these instructions in reverse order.

Elly Ayala

회원 가입일: 09/21/18

739 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 221