소개

This guide will show how to remove and replace the power wire in a Brentwood TS-292B toaster.

  1. Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.
    • Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.

  2. To remove the toasting lever, pull the lever away from the toaster.
    • To remove the toasting lever, pull the lever away from the toaster.

    • Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing.

    • Unscrew the wire bracket with a Phillips #2 screw driver.

    • Pull back on the black tab that is holding the circuit board in place.

    • While pulling the tab back, lift up on the circuit board.

    • Desolder the power wire connections on the circuit board.

    • Desolder in a well ventilated area.

    • The tip of soldering iron is hot handle with caution.

결론

To reassemble your device, follow these instructions in reverse order.

Elly Ayala

회원 가입일: 2018년 09월 21일

739 평판

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 29

전체 시간: 50