Brother CS6000i LCD Screen Replacement

소개

This guide will be showing you how to replace the LCD screen on a Brother CS6000i sewing machine. The LCD screen helps the user identify what sewing mode and speed they are working with. Some common symptoms particularly related to a faulty LCD screen would be faulty diodes or a blank screen while the machine is in operation.

Before beginning make sure power is disconnected and needle is removed from machine to prevent injury from electrical shock and or sharp objects.

필요한 것

1 단계 Body

Brother CS6000i LCD Screen Replacement, Body: 1 단계, 이미지 2개 중 1개

Brother CS6000i LCD Screen Replacement, Body: 1 단계, 이미지 2개 중 2개

Remove the five 20 mm Phillips #2 screws on the back of the device.
Remove the single 28 mm Phillips #2 screw on the back of the device.
Remove the single 23 mm Phillips #2 screw on the back of the device.

편집

2 단계

Pull the white cover off.

편집

3 단계

Remove the final screw, a 11 mm Phillips #2.
After removing all eight screws, you will have five 2 mm screws, one 28 mm screw, one 23 mm screw, and one 11 mm screw, all of which are Phillips #2.

편집

4 단계

Brother CS6000i LCD Screen Replacement: 4 단계, 이미지 3개 중 3개

Slightly pull apart the two halves of the machine, taking care not to strain the attached cables.
Unhook the white wires that are connected to the motherboard.
Fully separate the two halves.

편집

5 단계 LCD Screen

Brother CS6000i LCD Screen Replacement, LCD Screen: 5 단계, 이미지 1개 중 1개

Remove the two 10 mm Philips #2 screws that secure the screen.
Unplug the ribbon cable located at the top of the circuit board, then gently remove the LCD screen.

편집