주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

In this guide, you will see why your Brother PT-1290 isn't powering up correctly or at all.

  1. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.
    • First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    키트 쇼핑하기

    Enough RAM
    For All The Tabs

    키트 쇼핑하기
  3. Once the label maker is open, remove the six AAA drained batteries.
    • Once the label maker is open, remove the six AAA drained batteries.

    • If your using an AC adapter, replace the old one with the new HQRP adapter.

    • If you see white on the batteries, that would be corrosion. Be careful when disposing.

  4. Now place in the new six AAA batteries. Make sure the batteries are correctly in and touching the golden prongs. Make sure the batteries are correctly in and touching the golden prongs.
    • Now place in the new six AAA batteries.

    • Make sure the batteries are correctly in and touching the golden prongs.

결론

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

회원 가입일: 2014년 10월 25일

308 평판

안내서 3개 작성하였습니다

Gateway, Team 1-4, Johnson Fall 2014 Gateway, Team 1-4, Johnson Fall 2014 회원

GCC-JOHNSON-F14S1G4

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 13

전체 시간: 479