CHUWI GemiBook XPro Lower Case Replacement - iFixit 수리 안내서

소개

Use this guide to replace the lower case on your CHUWI GemiBook XPro.

필요한 것

1 단계 Lower Case

CHUWI GemiBook XPro Lower Case Replacement, Lower Case: 1 단계, 이미지 2개 중 1개

CHUWI GemiBook XPro Lower Case Replacement, Lower Case: 1 단계, 이미지 2개 중 2개

Discharge the battery below 25%, since a charged lithium-ion battery is a potential safety hazard. Fully power down the laptop and unplug any peripheries.
Orient the device to where you can see the bottom of the case.
Use a Phillips #1 screwdriver to remove the twelve 5.6 mm screws that secure the lower case.

2 단계

CHUWI GemiBook XPro Lower Case Replacement: 2 단계, 이미지 3개 중 1개

CHUWI GemiBook XPro Lower Case Replacement: 2 단계, 이미지 3개 중 2개

CHUWI GemiBook XPro Lower Case Replacement: 2 단계, 이미지 3개 중 3개

Insert an opening pick into the gap between the lower case and the chassis.
Pry along the entire perimeter of the laptop until the lower case fully releases.
Lift the lower case up and off of the chassis.

결론

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

작성자

Connor

회원 가입일: 03/29/22

12,218 평판

안내서 64개를 작성함

배지 +23개 더

팀

iFixit iFixit 회원

Staff

118 회원들

안내서 19,455개를 작성함

댓글 0개

조회 통계:

지난 24시간: 1

지난 7일: 5

지난 30일: 14

전체 시간: 39