기기를 수리하세요 커뮤니티 상점

Cambridge SoundWorks OontZ Angle Plus Speakers Replacement

필요한 것

  1. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement, Rubber Casing: 1 단계, 이미지 1/1

    • Remove the six screw covers from the bottom of the device.

    편집

  2. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 2 단계, 이미지 1/1

    • Starting from the screw covers, remove the front and back casing of the device.

    편집

  3. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 3 단계, 이미지 1/1

    • Carefully pull off the casing covering the ends.

    편집

  4. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 4 단계, 이미지 1/1

    • Slowly remove the casing from the top of the device.

    편집

  5. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement, Speaker Grill: 5 단계, 이미지 1/1

    • Unscrew the five 11.5mm Phillips screws from the bottom plate.

    편집

  6. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 6 단계, 이미지 1/1

    • Carefully pull apart the bottom and top plates, using the blue plastic opening tool.

    편집

  8. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 7 단계, 이미지 1/1

    • Once the plates are separated, slowly pull the bottom plate away from the top plate.

    • There are wires connected to both plates, so be cautious while doing this step.

    편집

  9. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 8 단계, 이미지 1/1

    • Use the metal spudger to bend the three bendable clamps on the ends of the speaker cover.

    • Beware, the bending process requires patience and extra time.

    편집

  10. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 9 단계, 이미지 1/1

    • Next, use the metal spudger to bend the four bendable clamps on the bottom of the speaker cover.

    • This step also requires some time and patience.

    편집

  11. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 10 단계, 이미지 1/2 Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 10 단계, 이미지 2/2

    • Finally, bend the speaker cover upward and it will slide out.

    편집

  12. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement, Speakers: 11 단계, 이미지 1/1

    • With some force, push the motherboard straight in toward the center of the device.

    편집

  13. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 12 단계, 이미지 1/1

    • Pull the motherboard straight out of the device.

    • There is some adhesive on the motherboard that holds it in place. This makes the motherboard fit in the groove rather tight.

    편집

  14. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 13 단계, 이미지 1/1

    • Unplug the speaker's connector from the motherboard.

    편집

  15. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 14 단계, 이미지 1/1

    • Unscrew the eight screws holding the speakers in place.

    편집

  16. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 15 단계, 이미지 1/1

    • Desolder the the wires connected to the back side of both speakers.

    편집

  17. Cambridge SoundWorks OontZ Angle Plus Speakers Replacement: 16 단계, 이미지 1/1

    • Carefully push the speakers out one at a time.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

David Rice

회원 가입일: 02/10/16

161 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

USF Tampa, Team 1-1, Nance Spring 2016 USF Tampa, Team 1-1, Nance Spring 2016 회원

USFT-NANCE-S16S1G1

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 7

전체 시간: 1,888