소개

This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.

부품

부품은 필요하지 않습니다.

  1. Remove the first set of two #00 phillips screws from the lens outer casing
    • Remove the first set of two #00 phillips screws from the lens outer casing

      • The first set of screws are located on the front and bottom of the lens casing

      • Pull the screws out and set them aside so as not to lose them

    댓글 쓰기

  2. Remove the remaining two #00 phillip screws from the lens outer casing
    • Remove the remaining two #00 phillip screws from the lens outer casing

      • The second set is located left and right side of the lens casing

      • Pull the screws out and set them aside so as not to lose them

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.

    댓글 쓰기

    • Remove the four #00 phillips screws from the SLR Lens Mount

    댓글 쓰기

    • After the screws have been removed, pull the SLR Lens Mount away from the body of the camera

    • Be aware that a pin will fall out when the SLR Lens Mount is removed.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Joe Blumberg

회원 가입일: 2011년 10월 04일

150 평판

안내서 1개 작성함

UW Stout, Team 5-1, Zhou Fall 2011 UW Stout, Team 5-1, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S5G1

3 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 50

전체 시간: 8,015