소개

The front panel will be removed in order to access other areas of the camera such as the battery door and top panel

부품

부품은 필요하지 않습니다.

  1. Open up the battery door.
    • Open up the battery door.

    댓글 쓰기

  2. Remove the batteries from the camera by sliding them out into your palm.
    • Remove the batteries from the camera by sliding them out into your palm.

    댓글 쓰기

    • Release the side latch to open the back panel.

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the two black 4.5mm screws above and below the latch.

    댓글 쓰기

    • Using your finger, carefully pry open the side panel from the top of camera.

    • Pull panel downwards to remove.

    • Make sure to keep track of the small black piece of rubber under the latch.

    댓글 쓰기

    • Remove the two silver 6mm Phillips #1 screws.

    댓글 쓰기

    • Flip camera over to the bottom.

    • Remove the one 5mm Phillips #1 silver screw.

    댓글 쓰기

    • Remove the front panel by pulling away from the side with the lever.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Jordan Tang

회원 가입일: 2014년 01월 24일

531 평판

안내서 5개 작성하였습니다

Cal Poly, Team 6-20, Maness Winter 2014 Cal Poly, Team 6-20, Maness Winter 2014 회원

CPSU-MANESS-W14S6G20

4 회원들

안내서 11개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 7

전체 시간: 370