소개

An Error 99 is an non specific error which means that camera doesn't know or have a code for the problem. In my case the shutter assembly needed replacing. This was a fairly involved process for a beginner such as myself.

This is not a comprehensive guide but should be used in conjunction with the Canon Service Manual and youtube videos. I hope that some of the pictures I took along the way might help you identify or remember how each step works.

부품

부품은 필요하지 않습니다.

  1. Get the Canon 40D Service Repair Manual
    • Get the Canon 40D Service Repair Manual

    • Have a clean and organized workspace. I labelled plastic trays by step number and put all items for each step in a separate tray.

    • Watch a couple Youtube videos on this process

    댓글 쓰기

  2. Peel off rubber grips
    • Peel off rubber grips

    댓글 쓰기

    • take off front piece

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • take off rear

    • connectors disconnect by flipping black/brown tab up and sliding plastic tab out.

    댓글 쓰기

    • Take off top cover

    댓글 쓰기

    • take off bottom plate

    • disconnect and remove bottom board

    댓글 쓰기

    • remove CMOS assembly

    댓글 쓰기

    • remove metal back

    • remove and replace shutter assembly, transfering components that aren't on the new one

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

how do you replace the bridge (male portion on camera) other than putting the card in a card reader

wareibevictoriap - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 7

지난 30일: 62

전체 시간: 4,198