기기를 수리하세요 커뮤니티 상점

Canon EOS Rebel G Back Panel Latch Replacement

소개

This guide teaches how to to install the back panel latch on your camera.

필요한 것

  1. Canon EOS Rebel G Back Panel Latch Replacement, Front Panel: 1 단계, 이미지 1/1

    • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

    편집

  2. Canon EOS Rebel G Back Panel Latch Replacement: 2 단계, 이미지 1/2 Canon EOS Rebel G Back Panel Latch Replacement: 2 단계, 이미지 2/2

    • Using your finger, peel back the textured grip so the components are separated.

    편집

  4. Canon EOS Rebel G Back Panel Latch Replacement: 3 단계, 이미지 1/3 Canon EOS Rebel G Back Panel Latch Replacement: 3 단계, 이미지 2/3 Canon EOS Rebel G Back Panel Latch Replacement: 3 단계, 이미지 3/3

    • Using the flat end of a spudger, loosen the connection between the front panel and the device.

    • Remove the front panel using your hands.

    편집

  5. Canon EOS Rebel G Back Panel Latch Replacement, Back Panel Latch: 4 단계, 이미지 1/1

    • Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.

    • Two 4.3 mm Phillips screws

    편집

  6. Canon EOS Rebel G Back Panel Latch Replacement: 5 단계, 이미지 1/1

    • Open the back panel by pushing the locking latch up.

    • Lift the latch cover off of the camera body.

    편집

  7. Canon EOS Rebel G Back Panel Latch Replacement: 6 단계, 이미지 1/1

    • Slide the side latch (for the back door) up and then lift straight away from the camera body.

    • Sometimes the latch will detach while pushing it up.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 7명과 함께

Zach

회원 가입일: 04/04/12

43 평판

안내서 8개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team 14-9, Forte Spring 2012 Cal Poly, Team 14-9, Forte Spring 2012 회원

CPSU-FORTE-S12S14G9

5 회원들

안내서 36개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 2,529