소개

This guide shows you how to install the anchors for the camera strap.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
  • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

댓글 쓰기

Using your finger, peel back the textured grip so the components are separated. Using your finger, peel back the textured grip so the components are separated.
  • Using your finger, peel back the textured grip so the components are separated.

댓글 쓰기

Using the flat end of a spudger, loosen the connection between the front panel and the device. Remove the front panel using your hands. Remove the front panel using your hands.
  • Using the flat end of a spudger, loosen the connection between the front panel and the device.

  • Remove the front panel using your hands.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Turn Camera over.
  • Turn Camera over.

  • Using a #00 Phillips screw driver, unscrew the two 4.9 mm Phillips screws located on either side of the viewfinder.

댓글 쓰기

Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.
  • Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.

댓글 쓰기

Lay the camera on its back.
  • Lay the camera on its back.

  • Unsolder the flash connection from the motherboard as noted by the blue circle.

댓글 쓰기

Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera. Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera. Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.
  • Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.

댓글 쓰기

Unscrew the 6.8 Phillips screw that holds the strap anchor by the LCD.
  • Unscrew the 6.8 Phillips screw that holds the strap anchor by the LCD.

댓글 쓰기

Unscrew the screws that hold the remaining strap anchor.
  • Unscrew the screws that hold the remaining strap anchor.

    • Two 4.9 mm Phillips screws

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Kyle Reis

회원 가입일: 2012년 04월 02일

49 평판

안내서 4개 작성하였습니다

Cal Poly, Team 14-9, Forte Spring 2012 Cal Poly, Team 14-9, Forte Spring 2012 회원

CPSU-FORTE-S12S14G9

5 회원들

안내서 12개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 1,018