소개
If the rubber grip on the camera is dirty or has fallen off, follow these instructions to remove the grip.
필요한 것
-
-
Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip.
-
Gently remove the rubber grip by pulling the adhesive side up and away from the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.
팀
Cal Poly, Team 3-41, Maness Spring 2014 Cal Poly, Team 3-41, Maness Spring 2014 회원
CPSU-MANESS-S14S3G41
4 회원들
안내서 10개 작성하였습니다
