주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Going on a long trip, and need to take extra memory? This guide will show you how to remove and switch out your SD card.

도구

부품

지정된 부품이 없습니다.

  1. Lay the camera on its back so that the card/battery door is facing you.
    • Lay the camera on its back so that the card/battery door is facing you.

    • Using your fingernail, slide the tab on the battery door up to release the battery door latch.

  2. Lift the now free card/battery door to reveal the battery compartment.
    • Lift the now free card/battery door to reveal the battery compartment.

    • Push the gray lever to the right side so that the battery can be removed and replaced with a new one.

  3. Manta(만타) 드라이버 키트

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta(만타) 드라이버 키트

    Upgrade Your Toolbox
  4. Lay the camera on its back so that the card/battery door is facing you.
    • Lay the camera on its back so that the card/battery door is facing you.

    • Using your fingernail, slide the tab on the battery door up to release the battery door latch.

  5. Open the battery compartment by lifting the card/battery door. You will see a thin SD Card slot below the battery.
    • Open the battery compartment by lifting the card/battery door. You will see a thin SD Card slot below the battery.

    • Push in the old SD card until it clicks to remove it and then push in the new card until it clicks into place.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Austin Tucker

회원 가입일: 2015년 08월 27일

976 평판

안내서 4개 작성하였습니다

USF Tampa, Team 16-4, Wollert Fall 2015 USF Tampa, Team 16-4, Wollert Fall 2015 회원

USFT-WOLLERT-F15S16G4

4 회원들

안내서 14개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 7

7일 전: 10

30일 전: 16

전체 시간: 1,683