기기를 수리하세요 커뮤니티 상점

Canon EOS Rebel XSi Daughter Board Replacement

소개

This replacement guide shows how to remove the device's daughter board, also known as the mother board extension located on the front side of the camera. The front panel must be removed before hand.

필요한 것

  1. Canon EOS Rebel XSi Daughter Board Replacement, Back Panel: 1 단계, 이미지 1/1

    • Squeeze the eyepiece between your index finger and thumb and lift up and off.

    편집

  2. Canon EOS Rebel XSi Daughter Board Replacement: 2 단계, 이미지 1/1

    • Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.

    편집

  3. Canon EOS Rebel XSi Daughter Board Replacement: 3 단계, 이미지 1/1

    • Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).

    편집

  4. Canon EOS Rebel XSi Daughter Board Replacement: 4 단계, 이미지 1/1

    • Remove grip by slowly peeling off.

    편집

  5. Canon EOS Rebel XSi Daughter Board Replacement: 5 단계, 이미지 1/1

    • Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece.

    편집

  6. Canon EOS Rebel XSi Daughter Board Replacement: 6 단계, 이미지 1/1

    • Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).

    편집

  8. Canon EOS Rebel XSi Daughter Board Replacement: 7 단계, 이미지 1/1

    • Remove the side panel by lifting off with fingers.

    편집

  9. Canon EOS Rebel XSi Daughter Board Replacement: 8 단계, 이미지 1/1

    • Use hands to pry off the back panel.

    편집

  10. Canon EOS Rebel XSi Daughter Board Replacement, Front Panel: 9 단계, 이미지 1/1

    • Using the PH000 screwdriver head, remove the four 3mm screws on the front

    편집

  11. Canon EOS Rebel XSi Daughter Board Replacement: 10 단계, 이미지 1/1

    • Remove front grip by gently peeling from the edge towards the center of the camera

    편집

  12. Canon EOS Rebel XSi Daughter Board Replacement: 11 단계, 이미지 1/1

    • Using the PH000 screwdriver head, unscrew the 3 mm screw that was under the grip

    편집

  13. Canon EOS Rebel XSi Daughter Board Replacement: 12 단계, 이미지 1/1

    • Using the PH000 screwdriver, remove the 4mm screw at the bottom of the camera

    편집

  14. Canon EOS Rebel XSi Daughter Board Replacement: 13 단계, 이미지 1/3 Canon EOS Rebel XSi Daughter Board Replacement: 13 단계, 이미지 2/3 Canon EOS Rebel XSi Daughter Board Replacement: 13 단계, 이미지 3/3

    • Remove the front panel by using tweezers to pry the panel over the metal ring protrusion

    편집

  15. Canon EOS Rebel XSi Daughter Board Replacement, Daughter Board: 14 단계, 이미지 1/1

    • Using the PH000 screwdriver head, remove the three 3mm screws

    편집

  16. Canon EOS Rebel XSi Daughter Board Replacement: 15 단계, 이미지 1/1

    • Carefully remove the cable from its plastic base with fingers

    편집

  17. Canon EOS Rebel XSi Daughter Board Replacement: 16 단계, 이미지 1/1

    • Gently slide board out with thumb

    편집

  18. Canon EOS Rebel XSi Daughter Board Replacement: 17 단계, 이미지 1/1

    • Gently disconnect cable by pulling out from plastic base with fingers

    편집

  19. Canon EOS Rebel XSi Daughter Board Replacement: 18 단계, 이미지 1/1

    • Disconnect cables by pulling out from base with fingers

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Erik Mork

회원 가입일: 01/27/17

596 평판

안내서 5개 작성하였습니다

배지: 13

배지 +10개 더

팀

Cal Poly, Team 22-10, Maness Winter 2017 Cal Poly, Team 22-10, Maness Winter 2017 회원

CPSU-MANESS-W17S22G10

4 회원들

안내서 10개 작성하였습니다

댓글 한 개

what does this fix

djratlif - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 10

전체 시간: 1,231