주요 콘텐츠로 건너뛰기

Canon EOS Rebel XSi Front Panel Replacement

필요한 것

  1. Canon EOS Rebel XSi Front Panel Replacement, Back Panel: 1 단계, 이미지 1/1
    • Squeeze the eyepiece between your index finger and thumb and lift up and off.

  2. Canon EOS Rebel XSi Front Panel Replacement: 2 단계, 이미지 1/1
    • Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera.

  3. Canon EOS Rebel XSi Front Panel Replacement: 3 단계, 이미지 1/1
    • Using the PH000 screwdriver head, remove the two 3mm screws on the right side of the camera (from the LCD screen).

  4. Canon EOS Rebel XSi Front Panel Replacement: 4 단계, 이미지 1/1
    • Remove grip by slowly peeling off.

  5. Canon EOS Rebel XSi Front Panel Replacement: 5 단계, 이미지 1/1
    • Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece.

  6. Canon EOS Rebel XSi Front Panel Replacement: 6 단계, 이미지 1/1
    • Using the PH000 screwdriver head, remove one 4 mm screw on the left side of the camera (from the LCD screen).

  7. Canon EOS Rebel XSi Front Panel Replacement: 7 단계, 이미지 1/1
    • Remove the side panel by lifting off with fingers.

  8. Canon EOS Rebel XSi Front Panel Replacement: 8 단계, 이미지 1/1
    • Use hands to pry off the back panel.

  9. Canon EOS Rebel XSi Front Panel Replacement, Front Panel: 9 단계, 이미지 1/1
    • Using the PH000 screwdriver head, remove the four 3mm screws on the front

  10. Canon EOS Rebel XSi Front Panel Replacement: 10 단계, 이미지 1/1
    • Remove front grip by gently peeling from the edge towards the center of the camera

  11. Canon EOS Rebel XSi Front Panel Replacement: 11 단계, 이미지 1/1
    • Using the PH000 screwdriver head, unscrew the 3 mm screw that was under the grip

  12. Canon EOS Rebel XSi Front Panel Replacement: 12 단계, 이미지 1/1
    • Using the PH000 screwdriver, remove the 4mm screw at the bottom of the camera

  13. Canon EOS Rebel XSi Front Panel Replacement: 13 단계, 이미지 1/3 Canon EOS Rebel XSi Front Panel Replacement: 13 단계, 이미지 2/3 Canon EOS Rebel XSi Front Panel Replacement: 13 단계, 이미지 3/3
    • Remove the front panel by using tweezers to pry the panel over the metal ring protrusion

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Erik Mork

회원 가입일: 01/27/17

596 평판

안내서 5개 작성하였습니다

Cal Poly, Team 22-10, Maness Winter 2017 Cal Poly, Team 22-10, Maness Winter 2017 회원

CPSU-MANESS-W17S22G10

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 1,191