주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This is a prerequisite to other guides that deal with the innards of the printer.

부품

지정된 부품이 없습니다.

  1. Lift the printer lid up as shown in the photo.
    • Lift the printer lid up as shown in the photo.

  2. Locate and remove the two 10mm side screws. There is one on each side. Locate and remove the two 10mm side screws. There is one on each side.
    • Locate and remove the two 10mm side screws. There is one on each side.

  3. Unhook the plastic panel from the printer starting from the top. You may need to wiggle the panel a bit to loosen it.
    • Unhook the plastic panel from the printer starting from the top.

    • You may need to wiggle the panel a bit to loosen it.

    • To remove the bottom part of the paneling gently lay the printer on its back.

    • The scanner lid needs to be supported when moving the printer

결론

To reassemble your device, follow these instructions in reverse order.

Helena Yanez

회원 가입일: 2013년 09월 29일

446 평판

안내서 4개 작성하였습니다

Cal Poly, Team 13-1, Forte Fall 2013 Cal Poly, Team 13-1, Forte Fall 2013 회원

CPSU-FORTE-F13S13G1

5 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 52