주요 콘텐츠로 건너뛰기

Canon Pixma MP480 Buttons Replacement

필요한 것

  1. Canon Pixma MP480 Buttons Replacement, Rear and Side Panel: 1 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement, Rear and Side Panel: 1 단계, 이미지 2/2
    • Remove the two 7.9 mm screws using a Phillips #1 screwdriver.

  2. Canon Pixma MP480 Buttons Replacement: 2 단계, 이미지 1/1
    • Lift up the back cover to remove it.

    • You may need to lift firmly as it requires quite a bit of force.

  3. Canon Pixma MP480 Buttons Replacement: 3 단계, 이미지 1/1
    • Open the front tray.

  4. Canon Pixma MP480 Buttons Replacement: 4 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 4 단계, 이미지 2/2
    • Open the scanner compartment.

    • Make sure the blue lever locks into place to keep the compartment open.

  5. Canon Pixma MP480 Buttons Replacement: 5 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 5 단계, 이미지 2/2
    • Remove the blue lever from its slot by pushing it back and twisting clockwise.

    • Close the scanner compartment and cover.

  6. Canon Pixma MP480 Buttons Replacement: 6 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 6 단계, 이미지 2/2
    • Pry open the side cover with the plastic opening tool.

  7. Canon Pixma MP480 Buttons Replacement: 7 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 7 단계, 이미지 2/2
    • Flip the printer over so that you are facing the bottom of the printer.

    • Use the plastic opening tool to remove the corner of the side panel from the plastic pin.

  8. Canon Pixma MP480 Buttons Replacement: 8 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 8 단계, 이미지 2/2
    • Use the plastic opening tool to loosen the side panel from the bottom of the printer.

  9. Canon Pixma MP480 Buttons Replacement, LCD: 9 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement, LCD: 9 단계, 이미지 2/2
    • Using the plastic opening tool, pry off the top cover of the LCD assembly.

    • Pry around the front and side edges for the easiest removal.

  10. Canon Pixma MP480 Buttons Replacement: 10 단계, 이미지 1/1
    • After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.

  11. Canon Pixma MP480 Buttons Replacement: 11 단계, 이미지 1/1
    • Completely remove the LCD by disconnecting the ribbon cable with a gentle pull.

  12. Canon Pixma MP480 Buttons Replacement, Buttons: 12 단계, 이미지 1/1
    • Locate the buttons on the printer.

  13. Canon Pixma MP480 Buttons Replacement: 13 단계, 이미지 1/1
    • Using the plastic opening tool, gently pry around the button cover to remove it from its fixture.

  14. Canon Pixma MP480 Buttons Replacement: 14 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 14 단계, 이미지 2/2
    • Remove the five 7.7 mm screws using a Phillips #1 screwdriver.

  15. Canon Pixma MP480 Buttons Replacement: 15 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 15 단계, 이미지 2/2
    • Using the plastic opening tool, gently pry around the cover behind the LCD screen to remove it from its fixture.

  16. Canon Pixma MP480 Buttons Replacement: 16 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 16 단계, 이미지 2/2
    • Remove the two 7.8 mm screws using a Phillips #1 screwdriver.

  17. Canon Pixma MP480 Buttons Replacement: 17 단계, 이미지 1/1
    • Gently pull the LCD screen up to remove it from its fixture.

  18. Canon Pixma MP480 Buttons Replacement: 18 단계, 이미지 1/1
    • Use the plastic opening tool to pry off the plastic button assembly.

  19. Canon Pixma MP480 Buttons Replacement: 19 단계, 이미지 1/1
    • Gently pull the plastic button assembly up to remove it.

    • The plastic button assembly has a ribbon cable connected on the bottom, so make sure to be careful pulling it.

  20. Canon Pixma MP480 Buttons Replacement: 20 단계, 이미지 1/1
    • Remove the ribbon cable connected to the backside of the plastic button assembly.

  21. Canon Pixma MP480 Buttons Replacement: 21 단계, 이미지 1/2 Canon Pixma MP480 Buttons Replacement: 21 단계, 이미지 2/2
    • Remove the seven 8.7 mm screws using the Phillips #1 screwdriver.

  22. Canon Pixma MP480 Buttons Replacement: 22 단계, 이미지 1/3 Canon Pixma MP480 Buttons Replacement: 22 단계, 이미지 2/3 Canon Pixma MP480 Buttons Replacement: 22 단계, 이미지 3/3
    • Locate the spring that holds the PCB in place on the bottom left of the plastic button assembly.

    • Gently lift the spring and pull the board out of its plastic button assembly.

  23. Canon Pixma MP480 Buttons Replacement: 23 단계, 이미지 1/1
    • Remove the buttons from the plastic button assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Khutug Dorjsuren

회원 가입일: 01/14/13

114 평판

안내서 2개 작성하였습니다

Cal Poly, Team 19-41, Regan Winter 2013 Cal Poly, Team 19-41, Regan Winter 2013 회원

CPSU-REGAN-W13S19G41

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 6

전체 시간: 1,681