Canon PowerShot A1000 IS Case Disassembly

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

The Cannon PowerShot A1000 IS is a compact digital camera. This guide gives instructions to remove and reattach the plastic casing when attempting internal repairs.

필요한 것

1 단계 Canon PowerShot A1000 IS Case Disassembly

Canon PowerShot A1000 IS Case Disassembly, Canon PowerShot A1000 IS Case Disassembly: 1 단계, 이미지 1/3

Canon PowerShot A1000 IS Case Disassembly, Canon PowerShot A1000 IS Case Disassembly: 1 단계, 이미지 2/3

Canon PowerShot A1000 IS Case Disassembly, Canon PowerShot A1000 IS Case Disassembly: 1 단계, 이미지 3/3

Transfer screws to a safe place upon removal.
The case is held together with two types of screws: fine thread screws that attach the case to the metal parts below, and coarse thread screws that attach the case to the plastic battery compartment.

번역하기

2 단계

Remove the two coarse thread screws on the side of the device, to the left of the camera lens.

번역하기

3 단계

Remove the two fine thread screws on the side of the device, to the right of the camera lens.

번역하기

4 단계

Canon PowerShot A1000 IS Case Disassembly: 4 단계, 이미지 3/3

Remove the two coarse thread screws and the single fine thread screw from bottom the camera.

번역하기

5 단계

Remove the one coarse thread screw underneath the battery cover.

번역하기

6 단계

Canon PowerShot A1000 IS Case Disassembly: 6 단계, 이미지 3/3

Gently pry apart the two covers starting from the bottom. When there is a 1/4" gap, run your finger gently along the the top of the camera, on the back cover, to release the three catches that secure the shell.

번역하기

7 단계

Gently remove both sides of the casing.

번역하기

8 단계

When replacing the cover, remove the AV/USB rubber cover for easier reconstruction.
Replace the front cover first leaving a small gap on the left hand side of the device for easy reattachment of the back cover.
Reattach the back cover by aligning it with the front cover and snapping the latches into place. Secure with screws in any order.