소개
Take out old, dead batteries. Then replace them with new ones.
-
-
Place the camera so the battery cover is facing up, as shown in the picture.
-
Gently push on the outer battery cover until you hear a click, and then release.
-
-
-
-
To open the inner battery cover, push down on the grey latch until you hear a click, and then release.
-
Remove the dead batteries from the camera.
-
-
-
After removing the batteries, insert the new batteries in the proper direction.
-
Now push the black, inner cover down until you hear a click to secure the batteries in place.
-
Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.
-
Congratulations, you're done.
Congratulations, you're done.
팀
Cal Poly, Team 7-37, Regan Winter 2011 Cal Poly, Team 7-37, Regan Winter 2011 회원
CPSU-REGAN-W11S7G37
4 회원들
안내서 10개 작성하였습니다
