기기를 수리하세요 커뮤니티 상점

Canon PowerShot A460 Front Casing Replacement

소개

This guide will guide the user toward removing the front casing of a Canon PowerShot A460 to prepare the camera for future repairs.

필요한 것

  1. Canon PowerShot A460 Front Casing Replacement, Battery: 1 단계, 이미지 1/1

    • Slide the switch on the battery cover labeled "CARD/BATT. OPEN." to the right.

    • While still holding the switch, pull the cover down, allowing it to release and open.

    편집

  2. Canon PowerShot A460 Front Casing Replacement: 2 단계, 이미지 1/1

    • Tilt the camera slightly to allow the batteries to fall out.

    편집

  3. Canon PowerShot A460 Front Casing Replacement: 3 단계, 이미지 1/1

    • Press on and release the memory card to eject it.

    편집

  4. Canon PowerShot A460 Front Casing Replacement, Front Casing: 4 단계, 이미지 1/1

    • Unscrew the 5mm Phillips #00 screw from the bottom of the camera.

    • Make sure to keep the different size screws organized to make reassembling the camera simpler.

    편집

  6. Canon PowerShot A460 Front Casing Replacement: 5 단계, 이미지 1/1

    • Unscrew the three 2mm Phillips #00 screws that are located on the bottom of the camera.

    편집

  7. Canon PowerShot A460 Front Casing Replacement: 6 단계, 이미지 1/1

    • Remove the 4mm Phillips #00 screw that is located on the left side of the camera, if the display screen is facing you.

    편집

  8. Canon PowerShot A460 Front Casing Replacement: 7 단계, 이미지 1/1

    • Take out the 4mm Phillips #00 screw under the rubber flap on the right end of the camera.

    편집

  9. Canon PowerShot A460 Front Casing Replacement: 8 단계, 이미지 1/2 Canon PowerShot A460 Front Casing Replacement: 8 단계, 이미지 2/2

    • Remove the second battery cover on the bottom of camera.

    • Take the silver battery out of the camera.

    편집

  10. Canon PowerShot A460 Front Casing Replacement: 9 단계, 이미지 1/3 Canon PowerShot A460 Front Casing Replacement: 9 단계, 이미지 2/3 Canon PowerShot A460 Front Casing Replacement: 9 단계, 이미지 3/3

    • Remove the 4mm Phillips #00 screw on the inside of the flap that hides the battery and memory card slots.

    • Remove the light grey, plastic piece.

    • Remove the plastic portion of the battery flap cover. The metal piece will remain attached.

    편집

  11. Canon PowerShot A460 Front Casing Replacement: 10 단계, 이미지 1/3 Canon PowerShot A460 Front Casing Replacement: 10 단계, 이미지 2/3 Canon PowerShot A460 Front Casing Replacement: 10 단계, 이미지 3/3

    • Slightly pull on each side of the camera. It should loosen up and come apart.

    • If it does not pull apart right away, use a little more force.

    • Do not give up!

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 9명과 함께

Alex

회원 가입일: 01/18/13

85 평판

안내서 2개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team 19-42, Regan Winter 2013 Cal Poly, Team 19-42, Regan Winter 2013 회원

CPSU-REGAN-W13S19G42

4 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 6

전체 시간: 786