Skip to main content

소개

We will be teaching how to replace the screen on a Canon PowerShot S230.

부품

No parts specified.

  1. Unscrewing the small screws to take off the backing, screws are on the side and there are 4
    • Unscrewing the small screws to take off the backing, screws are on the side and there are 4

  2. Pry open the backing Look for all screws before moving on Look for all screws before moving on
    • Pry open the backing

    • Look for all screws before moving on

  3. Remove metal shield from camera
    • Remove metal shield from camera

    • It's fine if you just use your hands

  4. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  5. Pry off the the front casing
    • Pry off the the front casing

    • REMOVE ALL SCREWS BEFORE MOVING ON

  6. Remove screws and metal shield at the bottom of the camera Remove screws and metal shield at the bottom of the camera
    • Remove screws and metal shield at the bottom of the camera

  7. Remove the screen, also remove any screws that may get in the way, if the screen pops out it’s okay, it’s suppose to do that. Remove the screw at the bottom
    • Remove the screen, also remove any screws that may get in the way, if the screen pops out it’s okay, it’s suppose to do that. Remove the screw at the bottom

  8. Remove the highlighted screws to remove the copper facing Remove the highlighted screws to remove the copper facing Remove the highlighted screws to remove the copper facing
    • Remove the highlighted screws to remove the copper facing

    • Now that the screen is replaced, all you need to do is go through the steps in reverse!

결론

To reassemble your device, follow these instructions in reverse order.

Angie

회원 가입일: 2016년 05월 31일

101 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 42