소개

This guide provides instructions on how to replace the shutter button assembly on the Canon PowerShot S400.

부품

부품은 필요하지 않습니다.

Unless otherwise stated,a #00 philips screwdriver will be used to remove screws.
  • Unless otherwise stated,a #00 philips screwdriver will be used to remove screws.

  • Remove the 4.75mm screw located in the top right corner of the backside of the camera.

  • Remove the four # screws located on the bottom of the camera.

댓글 쓰기

Remove the two screws located on the right side of the camera.(the side with the USB adaption plug)
  • Remove the two screws located on the right side of the camera.(the side with the USB adaption plug)

  • Remove the four screws on the left side of the camera.

  • This will release a small metal plate. Remove this plate.

댓글 쓰기

  • There is a small black plastic piece that sits above the lens underneath the camera case. This plastic piece may fall out when you remove the cases; recover the piece and save it.

  • Now separate the front and back camera casings.

댓글 쓰기

  • Using a spudger, carefully pry the shutter button assembly from the camera.

  • Install the replacement shutter button assembly.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Ross Bryan

회원 가입일: 2011년 01월 21일

350 평판

안내서 3개 작성하였습니다

Cal Poly, Team 5-19, Amido Winter 2011 Cal Poly, Team 5-19, Amido Winter 2011 회원

CPSU-AMIDO-W11S5G19

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 2,478