기기를 수리하세요 커뮤니티 상점

Canon PowerShot SD1200 IS Front and Rear Covers Replacement

소개

Use this guide to replace the front and back covers of the Canon PowerShot SD1200 IS camera or to access damaged internal components.

필요한 것

  1. Canon PowerShot SD1200 IS Front and Rear Covers Replacement, Front and Rear Covers: 1 단계, 이미지 1/1

    • Remove the battery.

    번역하기

  3. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: 2 단계, 이미지 1/3 Canon PowerShot SD1200 IS Front and Rear Covers Replacement: 2 단계, 이미지 2/3 Canon PowerShot SD1200 IS Front and Rear Covers Replacement: 2 단계, 이미지 3/3

    • Remove the two screws from the side of the camera casing with the strap. (4mm Phillips 00)

    • Remove the two screws from the bottom of the camera. (4mm Phillips 00)

    • Remove the two screws from the right side of the camera opposite the strap. (2mm Phillips 00)

    번역하기

  4. Canon PowerShot SD1200 IS Front and Rear Covers Replacement: 3 단계, 이미지 1/2 Canon PowerShot SD1200 IS Front and Rear Covers Replacement: 3 단계, 이미지 2/2

    • Pull off the front cover.

    • If the top of the cover sticks, use gentle downward pressure on the retention clips above the lens to release.

    • Remove the back cover.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Jeff Casper

회원 가입일: 09/15/16

848 평판

안내서 7개 작성하였습니다

배지: 18

배지 +15개 더

팀

USF Tampa, Team 17-5, Blackwell Fall 2016 USF Tampa, Team 17-5, Blackwell Fall 2016 회원

USFT-BLACKWELL-F16S17G5

3 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 23

전체 시간: 886