주요 콘텐츠로 건너뛰기

Canon PowerShot SD780 IS USB Port Replacement

필요한 것

  1. Canon PowerShot SD780 IS USB Port Replacement, USB Port: 1 단계, 이미지 1/1
    • Begin by turning off the camera and removing the battery to avoid any shock injuries.

  2. Canon PowerShot SD780 IS USB Port Replacement: 2 단계, 이미지 1/1
    • After the battery is removed, use a screwdriver to remove the five outermost screws on the camera to allow for a case replacement. Keep in mind that keeping track of where each screw came from is crucial for when putting the camera back together.

  3. Canon PowerShot SD780 IS USB Port Replacement: 3 단계, 이미지 1/1
    • There are 2 screws located on the left side of the camera. These screw locations are depicted with the red circle markings in the photos. These screws are 2.0 mm long.

  4. Canon PowerShot SD780 IS USB Port Replacement: 4 단계, 이미지 1/1
    • Remove the front panel of the camera case to expose the top left copper strip. Gently pull upward on the strip to disconnect it from the camera.

  5. Canon PowerShot SD780 IS USB Port Replacement: 5 단계, 이미지 1/1
    • Once you remove the back portion of the camera, you will see the charging component. Remove the metallic strip on the charging component which attaches it to the motherboard.

  6. Canon PowerShot SD780 IS USB Port Replacement: 6 단계, 이미지 1/1
    • Using a screwdriver, remove the screw that attaches the charging mechanism to the body of the camera. This will allow the mechanism to be released from the camera.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Arlene Ale

회원 가입일: 03/13/14

455 평판

안내서 4개 작성하였습니다

New Mexico State, Team 1-5, Easley Spring 2014 New Mexico State, Team 1-5, Easley Spring 2014 회원

NMSU-EASLEY-S14S1G5

2 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 6

전체 시간: 411