소개

Remove the back cover before removing LCD.

부품

부품은 필요하지 않습니다.

Remove one 2.25mm screw on the bottom.
  • Remove one 2.25mm screw on the bottom.

댓글 쓰기

Remove two 2.25mm screws on the right side looking from the front.
  • Remove two 2.25mm screws on the right side looking from the front.

댓글 쓰기

  • Remove one 4.7mm screw on the side with the AV output.

댓글 쓰기

  • Pull off the back cover.

  • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

댓글 쓰기

  • Remove 2 2.4mm screws on bottom.

댓글 쓰기

  • Follow the small data cable to where it connects to the camera.

  • Lift the back white portion to unlock the cable.

  • The cable should easily slide out.

  • The connector is very fragile. Use caution when lifting the lock.

댓글 쓰기

  • Gently lift LCD display off.

  • There will be two data cables still attached to the camera. Do not break them.

  • There may be a loose strip of metal along the inner side of the LCD display for a secure fit.

댓글 쓰기

  • Follow the larger cable to where it connects to the camera.

  • Lift the front black portion of the connector to unlock the data cable.

  • The cable should easily slide out.

  • The connector is very fragile. Use caution when lifting the lock.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Jeremy Rabaino

회원 가입일: 2010년 10월 10일

135 평판

안내서 6개 작성하였습니다

Cal Poly, Team 20-9, Maness Fall 2010 Cal Poly, Team 20-9, Maness Fall 2010 회원

CPSU-MANESS-F10S20G9

5 회원들

안내서 6개 작성하였습니다

where can I buy a replacement LCD screen for a SD800 IS

ALFRED - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 2,091