주요 콘텐츠로 건너뛰기

소개

The Canon PowerShot SD850 IS digital camera uses rechargeable batteries that you will occasionally have to remove. You can tell that your battery needs charging when the camera fails to turn on or displays a low battery indicator onscreen. Fortunately, you can easily get your camera running again. This guide explains how to remove or install the battery of your Canon PowerShot SD850 IS in two simple steps.

  1. Slide the light grey tab toward the edge of the camera using your fingernail. Pull the light grey tab up to open the door. These photos do not show the camera’s memory card or battery, which should be visible inside.
    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

  2. Slide the small brown tab toward the edge of the camera using your fingernail. Let go of the brown tab when the battery pops up.
    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

결론

To reassemble your device, follow thee instructions in reverse order.

Peter Tran

회원 가입일: 2010년 10월 06일

225 평판

안내서 6개 작성하였습니다

Cal Poly, Team 20-7, Maness Fall 2010 Cal Poly, Team 20-7, Maness Fall 2010 회원

CPSU-MANESS-F10S20G7

6 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 2,651