기기를 수리하세요 커뮤니티 상점

Canon PowerShot SD850 IS Function Set Button Replacement

소개

This manual is for replacing the function/set button located on the back of the camera.

필요한 것

  1. Canon PowerShot SD850 IS Function Set Button Replacement, Battery: 1 단계, 이미지 1/3 Canon PowerShot SD850 IS Function Set Button Replacement, Battery: 1 단계, 이미지 2/3 Canon PowerShot SD850 IS Function Set Button Replacement, Battery: 1 단계, 이미지 3/3

    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

    번역하기

  2. Canon PowerShot SD850 IS Function Set Button Replacement: 2 단계, 이미지 1/2 Canon PowerShot SD850 IS Function Set Button Replacement: 2 단계, 이미지 2/2

    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

    번역하기

  3. Canon PowerShot SD850 IS Function Set Button Replacement, Case: 3 단계, 이미지 1/2 Canon PowerShot SD850 IS Function Set Button Replacement, Case: 3 단계, 이미지 2/2

    • Remove the following 4 screws:

    • Two 2.8 mm Phillips #00 at the bottom of the camera.

    • Two 2.75 mm Phillips #00 on the opposite side of the wrist strap.

    번역하기

  4. Canon PowerShot SD850 IS Function Set Button Replacement: 4 단계, 이미지 1/3 Canon PowerShot SD850 IS Function Set Button Replacement: 4 단계, 이미지 2/3 Canon PowerShot SD850 IS Function Set Button Replacement: 4 단계, 이미지 3/3

    • Open the A/V OUT DIGITAL flap on the side of the wrist strap.

    • Remove the 2.75 mm Phillips #00 under the A/V OUT DIGITAL flap on the side of the wrist strap.

    번역하기

  6. Canon PowerShot SD850 IS Function Set Button Replacement: 5 단계, 이미지 1/2 Canon PowerShot SD850 IS Function Set Button Replacement: 5 단계, 이미지 2/2

    • On the bottom of the camera, use your fingernail to slide the light gray tab towards the edge of the camera.

    • Slide light gray door and pull up to open the door.

    • Remove the 8.35 mm Phillips #00 next to the brown tab that holds the battery.

    번역하기

  7. Canon PowerShot SD850 IS Function Set Button Replacement: 6 단계, 이미지 1/2 Canon PowerShot SD850 IS Function Set Button Replacement: 6 단계, 이미지 2/2

    • Gently pull the front cover straight out from the camera. This will expose the wiring on the front of the camera.

    번역하기

  8. Canon PowerShot SD850 IS Function Set Button Replacement: 7 단계, 이미지 1/1

    • Remove the 2.75 mm Phillips #00 next to A/V OUT DIGITAL.

    번역하기

  9. Canon PowerShot SD850 IS Function Set Button Replacement: 8 단계, 이미지 1/1

    • Slide the back casing (with the screen protector) off to reveal the LCD and back wiring.

    번역하기

  10. Canon PowerShot SD850 IS Function Set Button Replacement, Function Set Button: 9 단계, 이미지 1/2 Canon PowerShot SD850 IS Function Set Button Replacement, Function Set Button: 9 단계, 이미지 2/2

    • Identify and remove the plastic function set button. Do this by gently prying up as indicated in the photo.

    번역하기

  11. Canon PowerShot SD850 IS Function Set Button Replacement: 10 단계, 이미지 1/1

    • Lift the function set button ribbon cable from the two guide pins.

    번역하기

  12. Canon PowerShot SD850 IS Function Set Button Replacement: 11 단계, 이미지 1/1

    • Remove the ribbon cable by lifting on the flat tab and pulling the ribbon cable from the connection.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

iDeleted

회원 가입일: 07/07/10

2,101 평판

안내서 39개 작성하였습니다

배지: 9

배지 +6개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 1,149