기기를 수리하세요 커뮤니티 상점

Canon PowerShot SD850 IS Housing Replacement

보관된 가이드
해당 안내서는 단지 역사적인 목적으로 보관됩니다. 최신 버전 안내서를 사용하여 수리 하십시오.

소개

This guide is for accessing the cameras internal components for repairs and troubleshooting.

필요한 것

  1. Canon PowerShot SD850 IS Housing Replacement, Housing: 1 단계, 이미지 1/3 Canon PowerShot SD850 IS Housing Replacement, Housing: 1 단계, 이미지 2/3 Canon PowerShot SD850 IS Housing Replacement, Housing: 1 단계, 이미지 3/3

    • To avoid severe electric shock do not remove or tamper with internal camera flash components. An electrical capacitor is attached to the flash that can discharge if contact is made.

    • Remove the two side screws, indicated by the red circles, using a Phillips #00 screwdriver.

    • Remove the screw in the battery port, indicated by the blue circle, again using a Phillips #00 screwdriver.

    • Remove the front face by gently peeling the housing away from the camera.

    번역하기

  3. Canon PowerShot SD850 IS Housing Replacement: 2 단계, 이미지 1/3 Canon PowerShot SD850 IS Housing Replacement: 2 단계, 이미지 2/3 Canon PowerShot SD850 IS Housing Replacement: 2 단계, 이미지 3/3

    • Remove the back face by using a spudger to lift the tab highlighted in yellow

    • Pivot the back face clockwise as seen in the second photo.

    번역하기

  4. Canon PowerShot SD850 IS Housing Replacement: 3 단계, 이미지 1/2 Canon PowerShot SD850 IS Housing Replacement: 3 단계, 이미지 2/2

    • Remove the A/V port cover [no tools are necessary]

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 7명과 함께

iDeleted

회원 가입일: 07/07/10

2,101 평판

안내서 39개 작성하였습니다

배지: 9

배지 +6개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 841