소개

How to remove the outer casing of your Canon PowerShot SD870 IS.

부품

부품은 필요하지 않습니다.

  1. Remove the wrist strap, if present.
    • Remove the wrist strap, if present.

    • Remove the lithium-ion battery.

  2. Remove the two 4 mm Phillips #00 screws on the bottom of the camera. Remove the screw next to the wrist strap attachment. Pull up the “A/V OUT DIGITAL” cover and remove the screw above the USB port.
    • Remove the two 4 mm Phillips #00 screws on the bottom of the camera.

    • Remove the screw next to the wrist strap attachment.

    • Pull up the “A/V OUT DIGITAL” cover and remove the screw above the USB port.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Carefully unhook the “A/V OUT DIGITAL” cover from the hinge.
    • Carefully unhook the “A/V OUT DIGITAL” cover from the hinge.

  5. Pull the front cover from the camera by  using gentle upward pressure. Pull the front cover from the camera by  using gentle upward pressure.
    • Pull the front cover from the camera by using gentle upward pressure.

  6. Remove the two Phillips #00 screws from the flat end of the camera. Remove the black L-shaped side cover plate.
    • Remove the two Phillips #00 screws from the flat end of the camera.

    • Remove the black L-shaped side cover plate.

    • Remove the silver u-shaped retainer plate.

  7. Slide the back casing off.
    • Slide the back casing off.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Zach pelley

회원 가입일: 2010년 04월 19일

58 평판

안내서 1개 작성함

Cal Poly, Team 10-45, Garner Spring 2010 Cal Poly, Team 10-45, Garner Spring 2010 회원

CPSU-GARNER-S10S10G45

4 회원들

안내서 6개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 5

전체 시간: 7,829