주요 콘텐츠로 건너뛰기

소개

Remove the battery of the Canon PowerShot SX50 HS.

  1. Locate the battery compartment on the bottom of the camera.
    • Locate the battery compartment on the bottom of the camera.

    • Push the latch on the outside of the battery door to the right to get to the battery pack inside.

  2. Pull the brown latch on the inside of the battery door towards your palm (to the left). The battery pack should pop out (battery not pictured).
    • Pull the brown latch on the inside of the battery door towards your palm (to the left). The battery pack should pop out (battery not pictured).

    • Now remove the battery pack from the camera with your fingers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Megan Rund

회원 가입일: 2015년 04월 01일

626 평판

안내서 3개 작성하였습니다

Cal Poly, Team 12-7, Lancaster Spring 2015 Cal Poly, Team 12-7, Lancaster Spring 2015 회원

CPSU-LANCASTER-S15S12G7

5 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 11

전체 시간: 1,503