주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Canon Powershot A610 Speaker Replacement

필요한 것

  1. Canon Powershot A610 Speaker Replacement, Speaker: 1 단계, 이미지 1/3 Canon Powershot A610 Speaker Replacement, Speaker: 1 단계, 이미지 2/3 Canon Powershot A610 Speaker Replacement, Speaker: 1 단계, 이미지 3/3
    • Locate and remove the three screws attaching the side panel.

    • Remove the side paneling and the two remaining screws attached to the frame of the camera.

  2. Canon Powershot A610 Speaker Replacement: 2 단계, 이미지 1/1
    • Remove the two screws on the bottom panel of the camera.

  3. Canon Powershot A610 Speaker Replacement: 3 단계, 이미지 1/1
    • Open the battery cover.

    • Locate and remove the four screws inside.

    • One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

    • Close the battery cover.

  4. Canon Powershot A610 Speaker Replacement: 4 단계, 이미지 1/2 Canon Powershot A610 Speaker Replacement: 4 단계, 이미지 2/2
    • Open the "DIGITAL AV OUT" door on the camera.

    • Remove the three screws. The door can be removed from the camera.

  5. Canon Powershot A610 Speaker Replacement: 5 단계, 이미지 1/1
    • Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • The top cover does not completely detach.

  6. Canon Powershot A610 Speaker Replacement: 6 단계, 이미지 1/2 Canon Powershot A610 Speaker Replacement: 6 단계, 이미지 2/2
    • Open the battery cover.

    • Gently pull apart the front cover from the camera.

    • This may require some force. Be careful not to break the plastic.

  7. Canon Powershot A610 Speaker Replacement: 7 단계, 이미지 1/2 Canon Powershot A610 Speaker Replacement: 7 단계, 이미지 2/2
    • Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon.

  8. Canon Powershot A610 Speaker Replacement: 8 단계, 이미지 1/1
    • Remove the 3mm screw holding the metal frame.

  9. Canon Powershot A610 Speaker Replacement: 9 단계, 이미지 1/2 Canon Powershot A610 Speaker Replacement: 9 단계, 이미지 2/2
    • Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom.

    • You may need to use a bit of force as the speaker be glued in to the top casing.

    • There is a soft fabric speaker cover separating the speaker from the casing. Make sure not to remove it from its position in the housing.

  10. Canon Powershot A610 Speaker Replacement: 10 단계, 이미지 1/1
    • Unsolder the speaker at two points and reattach the new speaker.

결론

To reassemble your device, follow these instructions in reverse order.

Matthew Ramirez

회원 가입일: 01/20/11

625 평판

안내서 5개 작성하였습니다

Cal Poly, Team 11-26, Maness Winter 2011 Cal Poly, Team 11-26, Maness Winter 2011 회원

CPSU-MANESS-W11S11G26

3 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 2,910