소개

This guide will help Canon Powershot A70 owners replace the speakers, if the camera is not giving off sound.

  1. Open the battery compartment and remove the batteries.
    • Open the battery compartment and remove the batteries.

    • Remove the two screws that are deep in the battery compartment.

    댓글 쓰기

  2. Open the CF compartment and remove the top screw
    • Open the CF compartment and remove the top screw

    • The panel, that holds the shutter button and zoom, will come off.

      • Be careful! There are two small wires connecting the speaker to the body of the camera. These are very delicate so proceed with caution. Do not remove.

    댓글 쓰기

    • Unscrew the three small screws on the bottom.

    • remove the wrist strap

    댓글 쓰기

    • Remove the screw in the CF compartment.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Open the rubber Digital AV Out compartment flap.

      • Pry the battery with the IFIXIT opening tool.

      • Carefully pull out the battery with two fingers.

        • Unscrew the two screws that are now visible.

    댓글 쓰기

    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

      • There are three catches that hold the back casing to the body.

      • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

    댓글 쓰기

    • The interior of the camera should look like this.

    댓글 쓰기

    • Remove the two screws at the top of the battery compartment.

    댓글 쓰기

    • With your right thumb, pull back on the tab while using your left hand to pull the face of the camera away from the body.

    댓글 쓰기

    • Remove the two clearly visible screws from the control dial

    • The dial should come off easily

    댓글 쓰기

    • You should be able to see the two small wires connecting the speaker to a small green plug

      • With tweezers, carefully unplug the wires from the plug. The wire should slide straight out

    • Carefully replace the broken speaker/shutter panel with a new one

    댓글 쓰기

    • The removed panel should look like this

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Laura Greek

회원 가입일: 2010년 01월 25일

16 평판

안내서 2개 작성하였습니다

Cal Poly, Team 14-40, Regan Winter 2010 Cal Poly, Team 14-40, Regan Winter 2010 회원

CPSU-REGAN-W10S14G40

5 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 2,822