기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Canon Powershot S200 Motherboard Replacement

소개

The motherboard controls the operations of the camera. Damage to the motherboard requires an entirely new motherboard.

필요한 것

  1. Canon Powershot S200 Motherboard Replacement, Battery: 1 단계, 이미지 1/2 Canon Powershot S200 Motherboard Replacement, Battery: 1 단계, 이미지 2/2

    • Slide the grey latch to open the battery compartment.

    번역하기

  2. Canon Powershot S200 Motherboard Replacement: 2 단계, 이미지 1/2 Canon Powershot S200 Motherboard Replacement: 2 단계, 이미지 2/2

    • Push and slide the orange retaining clip to the right to remove the battery.

    번역하기

  3. Canon Powershot S200 Motherboard Replacement: 3 단계, 이미지 1/1

    • Remove battery from the camera.

    번역하기

  4. Canon Powershot S200 Motherboard Replacement, Motherboard: 4 단계, 이미지 1/1

    • Remove the lanyard.

    번역하기

  5. Canon Powershot S200 Motherboard Replacement: 5 단계, 이미지 1/1

    • Remove the two 2.3mm screws (underneath the name plate) and two 2.8mm screws (next to the threaded tripod mount) from the bottom face of the camera.

    • Be careful to keep track of the different screw sizes as you proceed with this guide.

    번역하기

  6. Canon Powershot S200 Motherboard Replacement: 6 단계, 이미지 1/1

    • Remove the single 3.8mm screw from the back face of the camera.

    번역하기

  8. Canon Powershot S200 Motherboard Replacement: 7 단계, 이미지 1/1

    • Remove the two 2.3mm screws from the right face of the camera.

    번역하기

  9. Canon Powershot S200 Motherboard Replacement: 8 단계, 이미지 1/1

    • Remove the two 3.2mm screws (outside edge) and two 3.7mm screws (towards middle) from the left side of the camera body.

    번역하기

  10. Canon Powershot S200 Motherboard Replacement: 9 단계, 이미지 1/1

    • Pull the back face panel away from the front end of the body. This may take some wiggling and force.

    번역하기

  11. Canon Powershot S200 Motherboard Replacement: 10 단계, 이미지 1/2 Canon Powershot S200 Motherboard Replacement: 10 단계, 이미지 2/2

    • Remove the CF card door from the left side of the camera body.

    번역하기

  12. Canon Powershot S200 Motherboard Replacement: 11 단계, 이미지 1/2 Canon Powershot S200 Motherboard Replacement: 11 단계, 이미지 2/2

    • Remove the rubber digital a/v out cap by sliding it out of the groove on the front plate.

    번역하기

  13. Canon Powershot S200 Motherboard Replacement: 12 단계, 이미지 1/1

    • Remove the front face by sliding it off.

    번역하기

  14. Canon Powershot S200 Motherboard Replacement: 13 단계, 이미지 1/1

    • Remove the rubber seal that goes over the right side of the viewfinder.

    번역하기

  15. Canon Powershot S200 Motherboard Replacement: 14 단계, 이미지 1/1

    • Remove the two 3.9mm screws that retain the laminated cooper sheet.

    번역하기

  16. Canon Powershot S200 Motherboard Replacement: 15 단계, 이미지 1/2 Canon Powershot S200 Motherboard Replacement: 15 단계, 이미지 2/2

    • Remove the seven wire connections that connect to the motherboard.

    번역하기

  17. Canon Powershot S200 Motherboard Replacement: 16 단계, 이미지 1/1

    • Remove the single 3.8mm screw that is on the motherboard.

    번역하기

  18. Canon Powershot S200 Motherboard Replacement: 17 단계, 이미지 1/1

    • Carefully remove the motherboard from the main frame of the camera body.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 10명과 함께

Orlando Zuniga

회원 가입일: 04/14/11

11 평판

안내서 1개 작성함

배지: 3

팀

Cal Poly, Team 20-70, Walters Spring 2011 Cal Poly, Team 20-70, Walters Spring 2011 회원

CPSU-WALTERS-S11S20G70

5 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 3

전체 시간: 1,880