주요 콘텐츠로 건너뛰기

소개

The user will need a replacement battery or fully charged battery to insert into the camera. No tools required.

  1. Rotate the camera to expose the underside of the camera.
    • Rotate the camera to expose the underside of the camera.

  2. Slide the rounded rectangle tab to the left to release the battery cover.
    • Slide the rounded rectangle tab to the left to release the battery cover.

  3. Push the small orange tab forward to release the battery      (Battery is ready for removal).
    • Push the small orange tab forward to release the battery (Battery is ready for removal).

결론

To reassemble your device, follow these instructions in reverse order.

Jody Wilkerson

회원 가입일: 2015년 04월 07일

517 평판

안내서 4개 작성하였습니다

댓글 2개

Simple & to the point. One would think manufacturers would hop on-board recruiting others like yourself.

Will check your site for other "ifixits". (Completely unsolicited).

Jim

Jim Brennan - 답글

Hi guys, I have a Canon SX500 IS and I jumped inside the swimming pool with its original battery by mistake so it was wet and decided to buy another battery after 4 years and put back on but it's still not switching on

I need some advice guys please what should I do?

Lwazi - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 812