Canon SX40 HS camera LCD Screen Cover Replacement - iFixit 수리 안내서

필요한 것

1 단계 LCD Screen Cover

Canon SX40 HS camera LCD Screen Cover Replacement, LCD Screen Cover: 1 단계, 이미지 1/2

Canon SX40 HS camera LCD Screen Cover Replacement, LCD Screen Cover: 1 단계, 이미지 2/2

Open/turn the LCD screen until it fully extends outwards.
Remove these two 4 mm black screws on the left side of the screen with a Phillips size #00 screwdriver.

2 단계

Canon SX40 HS camera LCD Screen Cover Replacement: 2 단계, 이미지 1/1

Partially close the screen and rotate it 90 degrees until the screen is facing upwards (photo view from the left front of the camera). Remove the 4mm black screw, indicated in the picture, with a Phillips #00 screwdriver.

3 단계

Canon SX40 HS camera LCD Screen Cover Replacement: 3 단계, 이미지 1/1

Rotate the screen 180 degrees until the monitor is facing downwards. Remove the 4mm black screw, indicated in the picture, with a Phillips #00 screwdriver.

4 단계

Canon SX40 HS camera LCD Screen Cover Replacement: 4 단계, 이미지 1/3

Canon SX40 HS camera LCD Screen Cover Replacement: 4 단계, 이미지 2/3

Canon SX40 HS camera LCD Screen Cover Replacement: 4 단계, 이미지 3/3

Using a plastic opening tool, remove the unfastened LCD screen cover from the camera.
Be careful not to pry and damage the circuit card under the screen cover.

5 단계

Canon SX40 HS camera LCD Screen Cover Replacement: 5 단계, 이미지 1/3

Canon SX40 HS camera LCD Screen Cover Replacement: 5 단계, 이미지 2/3

Canon SX40 HS camera LCD Screen Cover Replacement: 5 단계, 이미지 3/3

This is what you should see after removing the LCD screen cover. Replace the LCD screen cover if damaged.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

John Bui

회원 가입일: 03/26/15

352 평판

안내서 3개 작성하였습니다

배지 +3개 더

팀

UMass Dartmouth, Team 7-7, Cichon Spring 2015 UMass Dartmouth, Team 7-7, Cichon Spring 2015 회원

UMASSD-CICHON-S15S7G7

3 회원들

안내서 3개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 18

전체 시간: 1,708