기기를 수리하세요 커뮤니티 상점

Canon Vixia HF R500 Battery Charger Replacement

소개

The charging port of the Canon Vixia HF R500 is connected by a fragile ribbon cord. This cord can become damaged or disconnected preventing the battery from charging. This guide will show you how to check the connection.

필요한 것

  1. Canon Vixia HF R500 Battery Charger Replacement, Grip Belt: 1 단계, 이미지 1/3 Canon Vixia HF R500 Battery Charger Replacement, Grip Belt: 1 단계, 이미지 2/3 Canon Vixia HF R500 Battery Charger Replacement, Grip Belt: 1 단계, 이미지 3/3

    • On the right side of the camcorder remove the grip belt.

    번역하기

  2. Canon Vixia HF R500 Battery Charger Replacement, Battery: 2 단계, 이미지 1/1

    • Hold on to the battery.

    번역하기

  3. Canon Vixia HF R500 Battery Charger Replacement: 3 단계, 이미지 1/1

    • On the bottom of the battery hold the battery release switch.

    번역하기

  4. Canon Vixia HF R500 Battery Charger Replacement: 4 단계, 이미지 1/1

    • Remove the battery slowly away from the camcorder.

    • Removing the battery quick or in a different angle may cause sparks and damage to device.

    번역하기

  5. Canon Vixia HF R500 Battery Charger Replacement, Canon Vixia HF R500 Disassembly: 5 단계, 이미지 1/2 Canon Vixia HF R500 Battery Charger Replacement, Canon Vixia HF R500 Disassembly: 5 단계, 이미지 2/2

    • Remove the two 8mm Philips #000 screws on the side where the grip belt was located on.

    번역하기

  7. Canon Vixia HF R500 Battery Charger Replacement: 6 단계, 이미지 1/1

    • Remove the two 4mm Philips #000 head screws from the bottom of the camcorder.

    • A hidden 4mm Philips #000 screw is shown under the black plug shown.

    번역하기

  8. Canon Vixia HF R500 Battery Charger Replacement: 7 단계, 이미지 1/1

    • Remove the side piece plate.

    번역하기

  9. Canon Vixia HF R500 Battery Charger Replacement: 8 단계, 이미지 1/1

    • Near the LCD screen, remove the three 7mm Philips #000 screws in the picture shown.

    번역하기

  10. Canon Vixia HF R500 Battery Charger Replacement: 9 단계, 이미지 1/1

    • Carefully place the camcorder where the inside of the device is facing upwards and remove the 3mm Philips #000 screw shown.

    • Do not use strong magnetic parts on the inside, as they may damage the device.

    번역하기

  11. Canon Vixia HF R500 Battery Charger Replacement: 10 단계, 이미지 1/1

    • Using the spudger, pull the tab shown to start removing the ribbon cable.

    번역하기

  12. Canon Vixia HF R500 Battery Charger Replacement: 11 단계, 이미지 1/3 Canon Vixia HF R500 Battery Charger Replacement: 11 단계, 이미지 2/3 Canon Vixia HF R500 Battery Charger Replacement: 11 단계, 이미지 3/3

    • Using the Spudger, carefully remove the two ribbon cables that are connected to the top of the device.

    번역하기

  13. Canon Vixia HF R500 Battery Charger Replacement: 12 단계, 이미지 1/1

    • Remove the top piece.

    번역하기

  14. Canon Vixia HF R500 Battery Charger Replacement, Battery Charger: 13 단계, 이미지 1/1

    • Ensure the ribbon cord is connected

    • Check the condition of the ribbon cord and replace damaged cord.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

James Walker

회원 가입일: 01/29/16

461 평판

안내서 4개 작성하였습니다

배지: 10

배지 +7개 더

팀

Western Carolina University, Team 1-5, Virtue Spring 2016 Western Carolina University, Team 1-5, Virtue Spring 2016 회원

WCU-VIRTUE-S16S1G5

5 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 7

전체 시간: 964