주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Casio Cassiopeia E-125 Touch Screen Replacement

필요한 것

  1. Casio Cassiopeia E-125 Touch Screen Replacement, Battery: 1 단계, 이미지 1/1
    • Flip the device over to the back side.

  2. Casio Cassiopeia E-125 Touch Screen Replacement: 2 단계, 이미지 1/1
    • Slide the small switch on the back to "MAIN".

  3. Casio Cassiopeia E-125 Touch Screen Replacement: 3 단계, 이미지 1/1
    • Slide the battery cover downwards.

    • Pull off the battery cover.

  4. Casio Cassiopeia E-125 Touch Screen Replacement: 4 단계, 이미지 1/1
    • Pull the black tab to remove the battery.

  5. Casio Cassiopeia E-125 Touch Screen Replacement, Touch Screen: 5 단계, 이미지 1/1
    • Using the Phillips #00 screwdriver, remove the two screws near the top of the device.

  6. Casio Cassiopeia E-125 Touch Screen Replacement: 6 단계, 이미지 1/1
    • Using the Phillips #00 screwdriver, remove the two screws located inside the battery compartment.

  7. Casio Cassiopeia E-125 Touch Screen Replacement: 7 단계, 이미지 1/1
    • Partially separate the two halves of the case by inserting the tip of a small flat head screw driver into the space between the halves.

  8. Casio Cassiopeia E-125 Touch Screen Replacement: 8 단계, 이미지 1/1
    • Pry the two halves of the case apart with the small flat head screwdriver.

  9. Casio Cassiopeia E-125 Touch Screen Replacement: 9 단계, 이미지 1/1
    • Caution: be careful not to pull out the wires connecting the two halves of the outer case. These wires are necessary for the device to be able to function.

    • Lay the two halves of the outer case next to the central components as shown.

  10. Casio Cassiopeia E-125 Touch Screen Replacement: 10 단계, 이미지 1/1
    • Using the #00 Phillips screwdriver, remove the screws from the corners of the screen. There are 3 screws total.

  11. Casio Cassiopeia E-125 Touch Screen Replacement: 11 단계, 이미지 1/2 Casio Cassiopeia E-125 Touch Screen Replacement: 11 단계, 이미지 2/2
    • Lift the tab on the motherboard and pull out the ribbon cable.

    • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Ryan Fernandez

회원 가입일: 04/03/12

47 평판

안내서 5개 작성하였습니다

Cal Poly, Team 5-4, Forte Spring 2012 Cal Poly, Team 5-4, Forte Spring 2012 회원

CPSU-FORTE-S12S5G4

6 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 6

전체 시간: 979