Chocomaker Apple Dipper 9820 Disassembly

소개

The Apple Dipper Model 9820 is a kitchen appliance used to make dips and is produced by the brand ChocoMaker. This guide will walk you through how to take apart the Apple Dipper. There are no additional special skills needed to follow this disassembly guide.

필요한 것

1 단계 Chocomaker Apple Dipper 9820

Chocomaker Apple Dipper 9820 Disassembly, Chocomaker Apple Dipper 9820: 1 단계, 이미지 1/2

Chocomaker Apple Dipper 9820 Disassembly, Chocomaker Apple Dipper 9820: 1 단계, 이미지 2/2

Remove the Apple lid.

번역하기

2 단계

Remove the red rim by twisting it counterclockwise.

번역하기

3 단계

Chocomaker Apple Dipper 9820 Disassembly: 3 단계, 이미지 3/3

Unscrew the 4 screws around the exposed orange rim with a Phillips #1 screwdriver.

번역하기

4 단계

Lift the white bowl and metal bowl (with orange rim) as far as they go, in order to access and unscrew two screws from the metal part.
Unscrew using the Phillips #1 screwdriver.
These screws have a white circumference and are attached to the metal.

번역하기

5 단계

Remove the heat plates from under the metal plate holding them down.
This will allow you to completely remove the white bowl and metal bowl with the orange rim, leaving you with the red outer bowl and partially exposed circuit.

번역하기

6 단계

Chocomaker Apple Dipper 9820 Disassembly: 6 단계, 이미지 3/3

Flip the apple.
Remove the bottom lid by using the Phillips #1 screwdriver to remove the four screws.

번역하기

7 단계

Chocomaker Apple Dipper 9820 Disassembly: 7 단계, 이미지 3/3

Remove the 2 mm screws from the wire holder with a P106A screwdriver.
These screws are only holding the wire for it to come out of the apple in the right way. (They are two screws attached to a small orange thing)

번역하기

8 단계

Circuitry is exposed.
This device is controlled by a switch which influences where voltage and current occurs within the circuit.
There is one are two loops: one accounts for the "warm" setting and the other accounts for the "melt" setting.