소개
Remove the top cover to access internal components of Cisco 878 device.
필요한 것
-
-
Use the Phillips #1 Screwdriver to remove the two screws on back side of the device.
-
-
-
-
1. Gently push the top cover of the router away from you.
-
2. Lift it up top cover from the bottom of the router.
-
3. Remove top cover from the device.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.